|
Product in stock and ready to ship.
Arctic Silver 5 provides a new level of performance and stability. It is optimized
for use between modern high-power CPUs and high performance heatsinks or water-cooling solutions.
Contains 99.9% pure silver:
Arctic Silver 5 uses three unique shapes and
sizes of pure silver particles to maximize
particle-to-particle contact area and thermal
transfer.
High-Density:
Arctic Silver 5 contains over 88% thermally
Conductive filler by weight. In addition to
micronized silver, Arctic Silver 5 also contains
sub-micron zinc oxide, aluminum oxide and boron
nitride particles. These thermally-enhanced
ceramic particles improve the compound's
performance and long-term stability.
Controlled Triple-Phase Viscosity:
Arctic Silver 5 does not contain any silicone.
The suspension fluid is a proprietary mixture of
advanced polysynthetic oils that work together
to provide three distinctive functional phases.
As it comes from the tube, Arctic Silver 5's
consistency is engineered for easy application.
During the CPU's initial use, the compound thins
out to enhance the filling of the microscopic
valleys and ensure the best physical contact
between the heatsink and the CPU core. Then the
compound thickens slightly over the next 50 to
200 hours of use to its final consistency
designed for long-term stability.
(This should not be confused with conventional phase change pads
that are pre-attached to many heatsinks. Those
pads melt each time they get hot then
re-solidify when they cool. The viscosity
changes that Arctic Silver 5 goes through are
much more subtle and ultimately much more
effective.)
Not Electrically Conductive:
Arctic Silver 5 was formulated to conduct heat, not electricity.
(While much safer than electrically conductive
silver and copper greases, Arctic Silver 5
should be kept away from electrical traces,
pins, and leads. While it is not electrically
conductive, the compound is very slightly
capacitive and could potentially cause problems
if it bridges two close-proximity electrical
paths.)
Absolute Stability:
Arctic Silver 5 will not
separate, run, migrate, or bleed.
Specifications:
Thermal Conductance:
>350,000W/m2
°C (0.001 inch layer)
Thermal Resistance:
<0.0045°C-in2/Watt
(0.001 inch layer)
Average Particle Size:
<0.49 microns
<0.000020 inch
Extended Temperature Limits:
Peak: –50°C to
>180°C Long-Term: –50°C to 130°C
Performance:
3 to 12 degrees centigrade lower
CPU full load core temperatures
than standard thermal compounds
or thermal pads when measured
with a calibrated thermal diode
imbedded in the CPU core.
Coverage Area:
Arctic Silver 5 is sold in 3.5
gram and 12 gram tubes. The 3.5
gram tube contains enough
compound to cover at least 15 to
25 small CPU cores, or 6 to 10
large CPU cores, or 2 to 5 heat
plates. At a layer 0.003" thick,
the 3.5 gram tube will cover
approximately 16 square inches.
|