DFI UT 250GB nF3 Mboard

Product Code: DFINF3UT

The DFI NF3 UT 250GB motherboard is compatible with AMD Athlon 64 (up to 3700+) Socket 754, it has a nVIDIA nForce3 250Gb chipset, three 184-pin DDR SDRAM DIMM sockets. It supports single channel (64-bit wide) memory interface, up to 3GB memory when using DDR333 Supports up to 2GB memory when using DDR400, PC2700 (DDR333) and PC3200 (DDR400) DDR SDRAM DIMM, x8/x16, non-ECC, up to 512Mb DDR devices and unbuffered DIMM. It comes with one AGP slot that supports 8x (up to 2132MB/sec)/4x (up to 1066MB/sec) AGP and five PCI slots. This motherboard has Realtek ALC850 8CH audio CODEC and supports Microsoft DirectSound/DirectSound 3D and has S/PDIF-in/out interface. It has Marvell 88E1111 GbE PHY and is 10/100/1000BASE-T IEEE 802.3 compliant. The motherboard supports four SATA interfaces with speed up to 1.5Gbps, two Serial ATA ports supported by nForce3 250Gb chip and two Serial ATA ports supported by Marvell SATA PHY. NVIDIA RAID support spanning across Serial ATA and Parallel ATA, RAID 0, RAID 1, RAID 0+1 and JBOD. It also has two IDE connectors support four UltraDMA 133Mbps hard drives. The DFI NF3 UT 250GB has one PS/2 mouse port, one PS/2 keyboard port, one DB-9 serial port, one DB-25 parallel port, two S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out), one IEEE 1394 (Optional), one RJ45 LAN port, four USB 2.0/1.1 ports, six audio jacks for 8CH audio output, two connectors for 4 additional external USB 2.0/1.1 ports, one connector for 1 external IEEE 1394 port (Optional), one front audio connector for external line-out and mic-in jacks, one CD-in internal audio connector, one S/PDIF connector for optical cable connection, one IrDA connector, four Serial ATA connectors, two IDE connectors, one floppy connector, two ATX power supply connectors (20-pin and 4-pin), one front panel connector, three fan connectors for CPU fan, chassis fan and 2nd fan, EZ touch switches (power switch & reset switch). It is ATX form factor and has dimensions of 30.5cm x 24.5cm.